How to Choose the Right Longpass Filter for Your Application

โ—ˆ

Longpass filters transmit light above a specific cut-on wavelength while blocking shorter wavelengths. They are among the most commonly specified filters in fluorescence, imaging and laser systems โ€” yet choosing the wrong one can quietly ruin an experiment.

Start with the cut-on wavelength. This should sit just above the emission you want to pass and comfortably above the excitation you want to block. Remember that the cut-on shifts slightly with incidence angle, so account for the geometry of your optical path.

Next, look at transmission and blocking. A good hard-coated filter offers 90%+ transmission in the passband and OD 4 or greater in the stopband. If you are detecting weak fluorescence, out-of-band leakage is often the limiting factor, not peak transmission.

Finally, consider the substrate and coating. Borosilicate glass is economical for most visible applications; fused silica is preferred for UV or high-power laser use. Ion-assisted hard coatings are far more durable than soft coatings and tolerate cleaning and humidity.

Need help selecting? Send us your excitation and emission wavelengths plus your detector range, and our engineers will recommend a standard part or quote a custom filter.

#filters#buying guide#spectroscopy