Laser Damage Threshold: What It Really Means for Your Optics

◈

Laser-induced damage threshold (LIDT) is the maximum laser fluence an optic can withstand without permanent damage. Exceeding it causes pitting, coating delamination or catastrophic failure.

LIDT is not a single number. It depends on wavelength, pulse duration, beam diameter, repetition rate and even the cleanliness of the surface. A specification measured with 10 ns pulses cannot be applied directly to femtosecond lasers.

Always leave a safety margin — many engineers specify optics rated at two to three times their expected operating fluence. Contamination is a common culprit: a dirty surface can fail well below the rated threshold, so handle optics with care and keep them clean.

Our laser optics are tested and specified with clearly stated wavelength and pulse conditions. Contact us with your laser parameters for a recommendation.

#laser#coating#guide